Proposal for Final Project

int motorPin = 10;                   void setup() {  pinMode(motorPin, OUTPUT); } void loop()                   {  motorOnThenOff();  //motorOnThenOffWithSpeed();  //motorAcceleration(); } void motorOnThenOff(){   int onTime = 2500;   int offTime = 2000;   digitalWrite(motorPin, HIGH);   delay(onTime);      …

Non Blinking Circuit  Blinking Circuit  Arduino Codes Arduino 1 – The Blinking Lights (the timer lights) //Pin Definitions //Pin Definitions //The 74HC595 uses a serial communication  //link which has three pins int data = 2;  int clock = 3; int latch = 4; int data2 = 11;  int clock2 = 12; int latch2 = 13; //Used…

#include <Servo.h> int motorPin = 9; Servo myservo; int pos = 0; void setup() {   pinMode(motorPin, OUTPUT);   myservo.attach(10); } void loop() {   digitalWrite(motorPin, HIGH);   for(pos = 10; pos >=1; pos -= 1) //from 10 to paper S   {                        …

Code:     int reading=0; void setup(void) {    Serial.begin(9600);  pinMode(3, OUTPUT);  pinMode(4, OUTPUT);  pinMode(5, OUTPUT);  pinMode(6, OUTPUT);  pinMode(7, OUTPUT);  pinMode(8, OUTPUT);  pinMode(9, OUTPUT);  pinMode(10, OUTPUT);} void loop(void) {    reading = analogRead(1);  Serial.println(reading); if(reading < 900){  alloff(); }  else if(reading < 920){  alloff();  digitalWrite(3, HIGH);  } else if(reading < 930){  alloff();  digitalWrite(3, HIGH);    digitalWrite(4, HIGH);  } else if(reading…

Wearable Arduino Tone Generator by Brian VonKaenel [Arduino CDEFG Note Coding] int piezoPin = 10 ; /* declare the pin which the piezo speaker is attached to */ int keyOne = 2; /* declare the first soft button */ int keyTwo = 3; /* declare the second soft button */ int keyThree = 4; /* declare…

Nils Volker

 Joachim Sauter Presentation

Presentation New Media130 by Hansel De La Cruz

Camille Utter Back by Samantha Lopez