This is the breadboard that I used. I solder the corresponding wire to the breadboard. I then taped the breadboard the the flipper flappers. I changed the flipper flappers and used a table saw. I taped the servo to the flappers. I attached the breadboard the the trinket and then attached velcro the the flipper…
Category: Uncategorized
Final Project Documentation
Final Project Documentation Final Look Components: Sketch of Circuit SDA-> A4 SCL-> A5 Echo-> A1 Trig->A0 Div-> 3 CLK-> 7 DAT-> 6 RST-> 5 My Code // Turning NeoPixels on and off using a HC-SRO4 Ping Sensor /* This sketch reads a HC-SR04 ultrasonic rangefinder and returns the distance to the closest object…
Prototype for Final Project: Light up dress
My prototype for my final is a light up dress that lights up with your heartbeat. The Materials used were: 5v battery Arduino Heart pulse sensor Jumper wires ultra thin wire 5 neopixel Strip double sided tape black thread Scissors Bread board circuit: Wiring set up: Here is the code used for this project: #include…
Final Project Proposal
For my final project I would like to continue with my dress that lights up with your heartbeat. I want to add one last component that changes the color of the lights. Idea 1: The most Ideal, and my favorite component could be adding another input for temperature. The higher the temperature, the more red…
Final Project Proposal
Amy Chen For the final project I would like to continue to work on the Bunny Ear headphones. Some issues that came up with the headphones as a prototype was that the battery could not power them on. This is a minor issue that can be easily addressed. Something that I would like to do…
Final Project Proposal
Final Project Proposal My Project 3 was to my prototype for my final project. I was a mirror that would light up when there was someone in front of it. Thus, I used the UltraSonic Sensor and the neopixels strip to program them together. For my final project, I will add onto…
Anthony Pease: The Disruption Application
The Disruption Application Parts needed: Arduino Arduino board USB connector Sensor: Ultrasonic Sensor Male to female Jumper cables Motor: vibration (coin) motor Male to male Jumper cables 2N2222 NPN Transistor 1K ohm resistor Breadboard Sensor The first thing you need is to make sure the sensor is working. Attach the female ends of the jumper…
Project 3: Prototype Documentation
Project 3: Prototype Documentation Materials: A Photo Frame 11″ x 14″ Black or any color Plexiglass for the border(optional) 13″ x 16″ 1 meter Neo Pixel Lights Bread board HC-SRO4 Ultrasonic Sensor Arduino Uno 9V Power Source Wooden Box with lid Tools Hot Glue Gun Soldering Iron/Stand Scotch tape Scissors Electric Tape/Copper tape Hand Saw …
Project Two: Interactive Wearable!
The following project is on an interactive wearable. The images are from the bunny ears that react to sound. The materials used are Headphones Servos Bunny Ear Headband Mic Ardurino Trinket Pro Cables Alligator Clips Plastic Rectangles Mini Bread Board (Trinket) (Mic) (connecting the pieces) (end product) (Without Duck) (The underview) The code that…
project sketch 1
I want to hack a light string or use neopixels to create a sound responsive light string. A microphone would be connected so that these lights can flicker or change color to certain beats, etc. in any music that is played. This light string would have a switch that I would use to rewire to…
Assignment #2-Mirror Prototype Supplies
For Assignment #2, I decided to do a prototype for my final project: A light up mirror that displays time and will light up when someone passes by. I am just doing a mirror that lights up with movement sensing Wooden Frame 11in x 14in Acrylic Glass A smaller mirror Wooden box at the back…
Wearable Project
A wearable that I would like to create for the second project are headphones with cat or rabbit ears attached to them. The concept behind this project is that whenever the headphones detects a sound or light (depending on the receiver) the ears would move in reaction to it. I do not know it muscle…